So I'm not sure the um you know to what extent we would want to try to keep folks off. I don't know what they what folks do. What do you do on the trails? You just don't allow them. is that I I don't know what that >> Well, they're just kind of all over the town right now. Yeah, they're driving >> for Yeah, my town, too. So, yeah, >> like the fields and stuff like that, but >> yeah, >> that question is coming up everywhere, I guess, to do with the ebikes, >> the new the new uh epidemic of motorized bicycles. >> So, a question about handicap parking. I have seen a number of spots. How many are you providing? >> Going to test me. Like I said, I don't play I'm not a civil engineer. I just play one on public access television. Um so there are access to um uh handicap spots in both in the both front entries.
Um and I think maybe some more uh stringent language uh particularly regarding um clothing that may not uh cover as much of the body as we would wish uh for some of our older students is is something that is still causing us a little concern. Do we have enough wording in the policy to support administrative actions in holding students accountable for appropriate justice? >> Okay, thank you. I just kind of kind of heard that, but I would just >> wanted a little bit more clarification. Thank you, Kelly. >> Mrs. Cooper. >> Uh, I'd just like to ask a question as we go to look at this policy and I know we're looking at students and I just think more than just the students are involved. Are are teachers as we sit around with these focus groups are teachers and secretaries going to be included in this discussion?
Right. So, there's a a two spaces at the early learning center and then looks like 246 at the front door of the um of the membership which are all mandated by, you know, code code calculations and such. >> Is the two for the ELC >> and I don't know that's why I'm asking you is that appropriate for the number that's required by the code? >> Yep. Yeah. Okay. >> Yeah. It's all a calculation and you have to have them so that you can you see here like you could have a a van you could pull in one way or you could back in and then there's a loading zone in between. Yeah. >> Yeah. I do remember reading you've taken some provisions for the ballards to not be in those spaces. >> Uh yeah, in terms of like allowing Yeah. So the way it would work is you load and then then there's a flush curb right there at the front of that walkway.
>> Yes, teachers would be part of this conversation. >> Okay. Thank you. Are we all done? >> Um, are there any other questions from committee members or comments from committee members? >> Sorry. Weren't we going to um revisit that policy about uh the sporting um the conference uh regulations we didn't want to we got rid of one policy as far as I think it was a discipline for stu you know like student athletes. Where are we going to somehow do a new one to tie it into the Connecticut co, you know, or FIAC conference, whatever it is we belong to. >> We you will see uh that policy come back in a future policy meeting. Yes. >> Thank you. Thank you. >> All right. Any other feedback from non-committee members? All right. Seeing none, I'm looking to adjurnn, please, at 7:33 p.m. >> So move.
Um, yeah. No, no, uh, obstacles there. >> So, while we're at this image, can we just look at this corner again? I >> think so. >> There's a sidewalk right there. Like as you come to the end of it, it's like a >> This is all sidewalk, would you say? >> Yeah. Yeah. And it and it has the crosswalk that goes across to the main thing and they're going to connect >> which is right there. >> Yeah. And then they're going to connect >> their other sidewalk here which is >> Okay. So it's like going from a 10ft sidewalk to a five foot sidewalk. >> Yeah. Something like that. Yeah. We'll tee off the side of it. And >> I don't think it's I don't think it's 10 feet wide, but it's >> I was just looking at what it looks like. I you know from just from the drawing there if if there's is five it looks like the other one is about 10 but you know maybe it's not >> I hate to go back to the question I had earlier but about the site being ready for EVs is that already planned out >> so we haven't so so to be clear The code requires a certain percentage of spots to be EV ready, right?
>> Thank you, Teresa. May I have a second, please? >> Second. >> Thank you, M. >> We are. All those in favor, please signify by saying I. >> I. I. >> I. [Music]
Which means we have to have conduit in the ground. We have to be ready to put them in, right? Um, it does not require that you actually install the chargers. That's not to say that the Y is not interested in doing that. We haven't gotten that far yet. Um, but we will make sure we have those conduits in so that they are ready. What we're trying to balance, and some of this may end up being, you know, kind of a study of membership, is if you put them in right up front and then you make it so that people who don't have EV cars can not park there, then you actually start eating up your prime real estate and, you know, kind of penalizing the rest of the site. So, sometimes I see that um my clients will wait and see, you know, how many of our folks are bringing EV cars, how many should we put in, and then you go down the road of getting them getting them installed.
um etc. >> Right. Because I think in town we don't have a lot of EV charging. We have the middle school >> in here. >> I don't have so I don't know. >> I mean I don't have an EV but I'm just you know have to think about what the future might be. So if >> but where are the conduits going? >> So um I don't recall where we landed. Uh Andy, do you recall I we don't have this on this drawing. Do you recall where we landed? I think uh is that that rectangle along? Yeah, see the rectangle right here. This would be somewhere in this region would be so they'll be conduit to this area. Um that potentially you could line them all up. >> It says right here ready. >> Exactly. Yeah, >> they might be. >> I think there's also some at the top left there.
>> Yeah. Yep. >> What's considered the future expansion that >> So that we don't know yet. Could be gymnasium space, could be um studio spaces. Um it's >> so is it just that block right there? >> Yep. Just not part of this initial, you know, not what we would call phase one, phase two, phase. is just kind of like if there was 30 years down the road a desire that that would be a kind of building spot that we could add square footage to the Y. >> So is the the plan right now is though is to build both the early learning center and the YMCA. It's just not the expansion. Is that that okay? >> Yeah. as part of so we wanted to master plan the whole site to kind of see what could be done over the course of time but the desire in the near future would be the ELC and then um the membership center the aquatic center uh the trail system and then this would be kind of just a held space for any future needs that we don't know what they are yet really >> is there a reason why that could not have mirrored and cleared off your vegetation buffer >> say that again >> future expansion could have been on the other side that would have eliminated the need of that pinch point that you've created because the building has shifted.
>> So, we were also trying to be mindful of how you would physically build it in the future and that corner is we almost feel like we have to build our way out of that corner um because it is it is tight. The other conversation was about if that's where the pool is that you know on this side it's just a gymnasium so you could just add a a half this is the size of a half gym really so you could just add that on versus having you know we would end up having to flip the pool the whole building would would flip um yeah >> are there any online questions I don't know >> there's no one in the Okay. >> There's nobody here but the presenters. There's no one from the public >> on our on the team. They better not have question.
>> You have no me no members of the public here tonight. Um I did want to clarify though, Madam Chair, to your comment about comment 18 from Mike Carter about the loading. So section 5.2.1 just says that there must be adequate off- streetet loading spaces which are provided. And section 5.2.6 just says if there are loading bays, it specifies the size and height. There are no loading bays proposed. There are loading area. the loading area is specified on the YMCA's plans at the front of their building. So, that has been um addressed and there shouldn't be any further concerns from Mike, but I'll get clarification from that. But no loading docks are required. >> Okay. >> And as it sits on the plan should be sufficient. >> Okay. Thank you for checking on that. >> Um looking at the materials and I appreciate that. I don't earlier in the week um earlier in the week I had a Zoom meeting with Jasmine and I and Carrie um because I wanted to touch base about getting materials to the board in advance.
Typically we would get materials on Thursday um so that people would have time over the weekend. So, I I wanted to go through as we progress now with this project, the setting up the the pattern of how we're going to operate to make sure we get stuff in advance. Um, and Carrie suggested kind of going through u draft presentation of what we saw tonight. And so, um, one of my concerns at that point was that the elevations were very much like the elevations we saw earlier, not in terms of exactly the shape, but in terms of that they were very hard to see. It was a very ghosty building, you know, kind of back there. And so, I had asked for more information about what what does this building actually well is one of the things we said, what does it look like, right? And I know it's still early in the early in the process, but it's one of the purviews of the planning board is to say, what does this look like from the public way?
That's like our job. What does how does the building perform from the public way? What's on the back side doesn't even really concern us that much because you can't see it from a public way, but the front side does. And so I appreciate the difference between that earlier presentation and it's it seems like CBT went back and like really looked at these elevations a little bit better. not in terms of changing them, in terms of what the material looks like at various times of the day and in various sun and shadows. And I think I think that came across much better, but I am wondering about um the like the masonry, the brick seems to really change in the different lights. I don't know if it's just gray or if if if other colors are being considered, you know, or is it just gray gray metal, gray brick?
Um, and what's the what's your thought on on that and where it's going? We have so this this original rendering shows at least the gen the general intent that we want it to have some warm texture to it not to be super like monolithic as far as the color of it. At one point we were looking at salvaged masonry that seemed to be questionable but we really wanted kind of a something with texture something with a warm kind of a warm look to it. I know that these other renderings changed the color of the brick and I think we were focused more on the the metal panel than the brick, but we weren't saying that the brick or the CMU itself was going to change color. >> Right. No, I mean I think for me um and I'd interested in hearing with the other board, but that sorry, the other the image that you were just on where that brick does have more of a warmth to it in contrast with the the coolness of the panel that would then reflect whatever's around it.
makes it a little bit more substantial like that in a way that I like. I like the contrast between the the warm brick maybe what won't disappear and the panel that will kind of come and go depending on the light quality. I mean those that's what I was kind of looking to look at and in asking for more giving us something more to talk about with those elevations about what that building really looks like. Where are you standing Deepa? Um, >> not to put you on the spot, but I know you're thinking about it. >> I know. Um, felt too flat for me. It felt like it lost that kind of that articulation that it had in the initial renderings. It felt now it's become like very uh I don't know if that metal panel is overpowering the masonry and I think that's why that but it lost that articulation for some even though the image the inspiration image that you had of the vertical vertical panels and the same kind of that uh movement the horizontal seam lines are not really getting you that depth.
that some of the initial renderings had. You've changed the color palette for sure, but I think it added to that flatness of that elevation. >> Do you mean so that those shingles those shingles were more like >> depth and then I think the metal panels overpowering what's happening with the masonry as well? So to me it felt a little too flat and I felt like it feels too cold now instead of feeling yes the lighting tricks that you have with all the different daylight and the time of the day it helps but I think that's not the reality and maybe what may help is actually see samples of you know sea versus >> renderings are always hard to kind of yeah >> and again part of the the process with to value management is we are looking at probably in changing the ratio of the metal to CMU which is which will help that filling of making sure that the metal doesn't overpower the masonry >> and I'm assuming you're not going to have such long >> um panels without seam lines or something like that which would >> which is right now missing and is a little deceptive because you're definitely not going to see ft of panel just like that.
Yep, that is very true. >> So, >> it sounds like we need some close-ups and some material >> and a little more kind of articulation to these elevations. Right now, I'm assuming your goal today was just to show general massing of >> a general sense in the concept of the materials and the where the materials are located. >> Yeah. And thank you for adding that little bit of break in that facade to add that light. That definitely helps. Um, knowing that there's going to be a high number of residential properties, we absolutely have to careful about how much it's reflecting. What is it reflecting? You don't want from the folks across the street about too much reflection on the building as well. You do have trees, but >> so definitely look at that material. >> Blair is something we obviously come on. >> Yeah. driving on that road >> until the trees get bigger.
Uh do you maybe a picture of if you've used those panels before at another building? If I can just see what that building looks like, that'd be kind of cool. I don't know. I'm just I'm picturing a big metal like I I I don't have a design eye at all. So like you can show me a Lego building. It'll be fine. Um, I'm just I'm more worried about like the like the reflection coming and like >> just burning the grass and just like >> physical the physical samples are going to help a lot. >> We do a lot of glare studies with a lot of our buildings. >> The the most common contributor to that usually is the glass over the materials that we're using and there's not a lot of that glass on the south side. And again with that, we're not looking to have it be super reflective as far as the mirror like of it.
We really want it to be a a matte reflective like reflecting the environment not the you know super reflective on the sun. So I think the physical materials are going to be an important part of helping everyone understand what that that could be. >> Lonnie question for you about the materials. What was kind of the motivation to picking these materials used? Was it cost? Was it design? Was it something else? What was driving you to use lighter materials versus maybe darker materials? >> The lighter materials was definitely about making sure that the the building was respecting the environment itself. like the the idea of it reflecting the environment around it was a big driving factor and the having that lightness of the aluminum and then having the CMU base as a a contrasting material was cost based in a little bit but also just the the context of we are in New England we didn't want it to look like just a big metal warehouse so the masonry really helped with with that contrast and again we're playing with the the ratio still and probably going to increase the masonry But that was the really the driving the driving factor of reflecting the environment around it with the lighter color metal.
>> Yeah. >> So I have a question for you all. this building still could be a matter of years away. And so we're really struggling with trying to understand how like how far do we let the design team go if we don't know how, you know, when the fundraising aligns with it, right? And so I feel kind of like we could talk about this forever and when we go to build it, it still might look different because it's going to be driven, you know, we have all these design intents. we have our ideal, you know, building of what we want it to look like, but but the the fundraising may take us down a different route entirely, right? So, I guess I look for your advice on how do we get a site plan approval for a master plan knowing that we still have to go through a building permit process.